- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
The PBM 4500 machine comes with a torque accepting mandrel, built with a worm gear drive unit for extra torque to handle extra thick pipe walls.
Our machines are the only machines on the market that can bevel, face, and counter-bore 1inch wall - worry free from damaging the gears.
為了應對超厚管壁所需的大扭矩，這款4 ”的坡口機含有抗扭轉心軸，以及蝸輪蝸桿組件 。
PBM4500坡口機能夠同時對管件進行坡口、平口及內徑鏜孔。渦輪渦桿組件提供的大扭矩最厚可以加工壁厚達1”的管件。同樣的，這有利于防止損壞齒輪結構。
PERFORMANCE:
Lock in mandrel blades (no springs to lose)
Adjustable keyway on machine and mandrel (eliminates backlash and chatter)
1 hp pneumatic motor
24 lbs. approximate working weight
Hardened mandrel 55 Rc. (less chance of gouging with metal chips)
Three slots to do beveling, facing, deburring or counter-boring
Single mandrel with mandrel blades to cover size ranges
特征:
• 自鎖式心軸楔塊 (無彈簧丟失之憂)
•可調式鍵和鍵槽結構，消除間隙和震動
• 氣動馬達, 氣壓: 55 CFM 和 90psi.
• 重量大約31磅
• 心軸硬度RC55（不易被切屑刮傷磨損 ）
•當需要更大扭矩時，使用蝸輪蝸桿驅動
•三個刀片安裝槽可同時進行坡口、刮平、去毛刺、內徑鏜孔
•包括便攜式工具箱
•單個心軸配合可換式脹塊，覆蓋了所有的工作管徑
TECHNICAL SPECS:
Size range 1.25 to 4 inches Pipe (31.74 mm -101.6 mm)
Max wall thickness to 1inch
Air Power requirements: 70 cfm at 90 psi.
For PBM-4500 accessories, please visit our website or contact our sales department for further assistance.
