| 3、機構 Mechanical |
| 3-1、外觀尺寸 External dimension |
172*51 MM |
| 3-2、重量 Weight |
920g(lead wire 80mm& without connector) |
| 3-3、軸承 Bearing |
滾珠軸承BALL bearing |
| 4、 電氣特性 Electrical characteristics(在通風及額定電壓條件下 in free air at rated voltage) |
| 4-1、額定電壓 Rated voltage |
220V/50-60HZ |
| 4-2、額定電流 Rated current |
0.23±10%A |
| 4-3、額定輸入功率 Rated input power |
35±10%W |
| 5、 效率 Efficiency |
| 5-1、風扇轉數 Rated speed(范圍 range) |
2650RPM±10% |
| 5-2、最大風量 Maximum air flow |
250CFM |
| 5-3、最大靜壓 Maximum static air pressure |
0.68Inch-H2O |
| 6、 特性規格 Characteristics |
| 6-1、 操作電壓 Operating voltage range |
180v~260v |
| 6-2、 起動電壓 Staring voltage |
140V(ON/OFF) |
| 6-3、 鎖定電流 Locked current |
0.63A(Reference) |
| 6-4、 操作溫度 Operating temperature |
-10℃~+70℃ |
| 6-5、 儲存溫度 Storage temperature |
-30℃~+85℃ |
| 6-6、 環境濕度測試 Environment humidity |
10%(RH)45℃ for 24 hours & 98% (RH) 45℃ for 24 hours |
| 6-8、 絕緣阻抗強度 Insulation resistance |
在本體與兩條導線間加 500V 直流電壓之絕緣阻抗10MΩ以上 At least 10MΩ at 500 VDC between housing and both lead wires |
| 6-9、 絕緣耐壓強度 Dielectric strength |
必須能抵抗在本體與兩線間加 1800V 交流電壓1分鐘 1mA Withstand 1800 VAC 1 minute 1mA between housing and both lead wires |
| 6-10、預期壽命(MTBF)：指在額定電壓及正常溫度，濕度條件下連續運轉。 |
| Life ecpectance:continuous operation at rated voltage and normal temperature & humidity |
| 6-10-1、含油軸承壽命：20000小時 |
| Sleeve bearing life expectance:20000Hours |
| 6-10-2、雙滾珠軸承預期壽命：50000小時 |
| Two balls bearing life expectance:50000Hours |
| 6-11、端子抗拉強度 Tensible strength of connector |
端子以1公斤的拉力拉扯15秒不會脫落 |
| Connector will not be any broken at 1 Kg for 15 seconds per piece. |
