丁基鋼板膩子止水帶是采用優質高分子材料與鍍鋅板復合而成的橡膠止水帶產品。其中橡膠膩子的主體材料具有耐老化性能優良，特強的自粘性；夏季高溫不流淌。冬季低溫不發脆；并具有優異的耐水、耐酸堿和耐老化性能；使用壽命長，產品本身無毒，環境良好。為了承受一定的彎曲和壓力。中間來有0.4或0.6mm的鋼板。該止水帶對建筑縫之間提供可靠的防水、防滲功能。
The butyl steel plate putty water stop belt is a rubber water stop belt, which is made of high quality polymer material and galvanized sheet. The main material of rubber putty has good aging resistance and strong self viscosity, and it does not flow at high temperature in summer. In winter, the low temperature is not brittle; it has excellent water resistance, acid and alkali resistance and aging resistance; long life, the product itself is non-toxic, and the environment is good. To bear a certain amount of bending and pressure. There are 0.4 or 0.6mm steel plates in the middle. The water stop belt provides reliable waterproof and anti-seepage function between construction joints.
鋼板橡膠止水帶是將鍍鋅鋼板插入硫化好的橡膠中，橡膠采用國產一級特種橡膠與促進劑量、防老劑等，經混煉、擠壓后與鍍鋅鋼板粘合而成的一種新型接縫止水產品。
Steel plate rubber sealing strip is inserted into the good will of galvanized steel plate vulcanized rubber, rubber made of a special rubber antioxidant and promoting dose, etc., a new type of sealing products through mixing, extrusion and galvanized steel plate bonding.
這種止水帶可以有效地防止各種荷載下產生的彈性、變形及施工縫的溫差變化，起到堅固密封。并且能有效的防止施工縫漏水，滲水，并對各種作用力起到緩沖作用。
This kind of water stop belt can effectively prevent the variation of temperature difference between the elastic, deformation and construction joints under various loads, and it can be a strong seal. And it can effectively prevent water leakage and seepage of construction joints, and play a buffer effect on various forces.
本產品具有耐老化性能優良，特強的自粘性；夏季高溫不流淌。冬季低溫不發脆；并具有優異的耐水、耐酸堿和耐老化性能；使用壽命長，產品本身無毒，環境良好。為了承受一定的彎曲和壓力。中間來有0.4或0.6mm的鋼板
This product has good aging resistance, strong self viscosity, high temperature not flowing in summer. In winter, the low temperature is not brittle; it has excellent water resistance, acid and alkali resistance and aging resistance; long life, the product itself is non-toxic, and the environment is good. To bear a certain amount of bending and pressure. A steel plate with 0.4 or 0.6mm in the middle
。本產品可以對建筑縫之間提供可靠的防水、防滲功能。當使用普通橡膠止水帶時，如果建筑結構變形大時，橡膠止水帶則隨著結構的沉降，其橫向截面拉長，變薄，超過其疲勞變形極限時，很可能會形成新的滲漏縫隙。
. This product can provide reliable waterproof and anti-seepage function between construction joints. When the ordinary rubber water stop is used, if the construction deformation is large, the rubber sealing belt will probably form new leakage gaps when the transverse section is elongated and thinned and the fatigue deformation limit exceeds the fatigue limit.
我們可以根據用戶要求生產各種非標型號的產品，并滿足各種工程上的實際需要。適用于許多大型建筑領域，尤其是在水壓高和結構變形量較大時，其止水效果更為明顯。
We can produce various non - standard models according to the user's requirements and meet the practical needs of various projects. It is suitable for many large construction fields, especially when the water pressure is high and the deformation of the structure is large, and the effect of water stop is more obvious.
我公司可以生產各種規格的鋼板膩子止水帶產品，并可根據用戶要求，生產各種非標型號的產品，滿足工程上的實際需要。1、主要應用范圍：隧道、地鐵、堤壩、涵洞、水利水電工程中施工縫、高層建筑地下室、地下停車場等主要工程施工縫。
Our company can produce all kinds of steel plate, putty and water stop products, and can produce all kinds of non-standard products according to users' requirements, so as to meet the actual needs of engineering. 1, the main applications: tunnel, subway, embankment, culvert, water conservancy and hydropower engineering construction joints, high-rise building basement, underground parking lots and other major construction joints.
鋼板膩子止水帶的施工方法及注意事項
Construction method and precautions of steel plate putty water stop belt
A、將鋼板膩子止水帶膨脹膩子連接處搭接100mm，用手壓緊排除空氣靠其自身粘接牢固，并加固軋絲后重新貼上保護膜。
A, connect the steel plate and putty water stop and the expansion putty joint to 100mm. Press the air by hand to remove the air and stick firmly to it, and reinforce the wire to re attach the protective film.
B、將鋼板膨脹膩子止水帶安放在墻體的中間位置，用鐵絲固定在鋼筋上，止水帶略高于混凝土介面。
B, put the steel plate expansion putty water stop in the middle of the wall, fixed on the steel wire with iron wire, the water stop is slightly higher than the concrete interface.
C、再次澆注前，將橡膠止水帶下端的保護膜取掉，混凝土澆注至鋼板膨脹膩子寬度的1／21／3處，在二次澆注前將上端保護膜取掉，再進行澆注。而采用鋼板橡膠止水帶時，兩邊的鋼板與周圍的混凝土結構的粘接極強，同是鋼板與橡膠粘接極其牢固。當結構變形時，只存在橡膠部分拉長，變薄，而鋼板與混凝土、鋼板與橡膠之間不會產生新的滲漏縫隙，因此，用鋼板橡膠止水帶即增強了結構變形時的防滲性能，同時對整個工程的防滲止水起到了重要的質量保證。
C, before pouring again, remove the protective film at the lower end of the rubber sealing belt, and pour the concrete into the 1 / 21 / 3 width of the expansion putty of the steel plate, then remove the upper protective film before the two time of pouring, and then pour. When the steel plate rubber belt is used, the steel plate on both sides is very strong with the surrounding concrete structure, and the steel plate and rubber are firmly bonded. When the deformation of the structure, only the rubber part elongate, thin, but not between steel and concrete, steel plate and rubber leakage gap, new so that enhances the anti-seepage performance of structure deformation when using steel plate rubber waterstop, and seepage of the whole project played an important quality assurance.
