電池點焊機
Battery Spot Welder
主要特性：
1. 電池點焊機主要分兩種類型：AMP-10K交流電池點焊機和DPM-10K直流電池點焊機；
2. 采用單面雙點過流焊接的原理，不傷及被焊工件的內部結構；
3. 焊接痕跡美觀，火花小，無發黑（電池不會因點焊后出現凹陷、流液的現象），完全克服鋰電池點焊后出現低壓和出水現象，是生產組裝電池的理想設備；
4. 焊針的壓力和兩針的距離可獨立調節，且調節方便，確保焊接壓力穩定可靠；
5. 外形美觀，輕巧；
6. DPM-10K優點：LCD顯示設置參數，更準確，直觀，方便，直流輸出，焊接效果更美觀。
主要應用：
電池組制造，特種電池組裝，廢舊電池回收制作電池組，蓄電池標牌焊接，以及焊接各種堿性電池，鎳鎘電池，鎳氫電池，鋰離
子電池等。
Main Features：
? There are two Model:AMP-10K AC Battery Spot Welder and DPM-10K DC Battery Spot Welder;
? Adopt the principle of Single sided, two points, and over-current welding,doesn’t damage the internal structure of welded workpieces;
? Beautiful welding traces, small spark, no black (The battery won’t sag or fluid flow after spot-welding). It completely overcomes the problems that the lithium battery has low pressure and the fluid flows out of the battery. This spot welder is the most ideal assembly equipment for battery production;
? The pressure of welding pins and the distance between the two pins can be regulated independently. And the regulation is quite convenient to make sure that the welding pressure is stable and reliable;
? Beautiful, light and handy in design;
? DPM-10K advantage:controller LCD panel displays welding parameters making process control more accurate and more convenient,Input DC,welding area more beautiful.
Main Applications
Battery Pack Production, Custom Battery Packs, Battery Pack Re-building, Battery Cell Tabbing Weld Alkaline, Ni-cd, Ni-MH, Li-Ion Cell Types, etc.
主要技術參數Main Technical Parameters：
規格 SPECICATIONS APM-10K DPM-10K
輸出功率 Output Power 10KVA 10KVA (LCD Display)
驅動形式 Drive Style 腳踏/氣動（Pedal/Pneumatic) 腳踏/氣動（Pedal/Pneumatic)
輸出信號 Output Signal 光電開關（Opto-electric Switch) 光電開關（Opto-electric Switch)
焊接電流 Welding Current AC 0-99%（可調）(Adjust) DC 0-99%（可調）(Adjust)
電極直徑 Electrode Diameter Φ3 Φ3
電源輸入 Input Power AC 110-220V±10%/50Hz-60Hz AC 220V±10%/50Hz-60Hz
焊接電源 Welding Power 交流脈沖（AC Pulse） 逆變直流（Inverter DC）
電極行程 Electrode Stroke 15mm 15mm
