200*6丁基鋼板膩子止水帶用途
丁基鋼板膩子止水帶是采用優質高分子材料與鍍鋅板復合而成的橡膠止水帶產品。其中橡膠膩子的主體材料具有耐老化性能優良，特強的自粘性；夏季高溫不流淌。冬季低溫不發脆；并具有優異的耐水、耐酸堿和耐老化性能；使用壽命長，產品本身無毒，環境良好。為了承受一定的彎曲和壓力。中間來有0.4或0.6mm的鋼板。該止水帶對建筑縫之間提供可靠的防水、防滲功能。
Butyl steel plate putty water stop belt is made of high quality polymer material and galvanized sheet compounded rubber waterproof strip product. The main material of the rubber putty has excellent aging resistance and strong self adhesion; the high temperature does not flow in summer. Low temperature and no brittleness in winter, and has excellent water resistance, acid and alkali resistance and aging resistance, long service life, non-toxic products, good environment. In order to withstand certain bending and pressure. There are 0.4 or 0.6mm steel plates in the center. The waterproof belt can provide reliable waterproof and anti-seepage function to the building joints.
200*6丁基鋼板膩子止水帶用途
鋼板橡膠止水帶是將鍍鋅鋼板插入硫化好的橡膠中，橡膠采用國產一級特種橡膠與促進劑量、防老劑等，經混煉、擠壓后與鍍鋅鋼板粘合而成的一種新型接縫止水產品。這種止水帶可以有效地防止各種荷載下產生的彈性、變形及施工縫的溫差變化，起到堅固密封。并且能有效的防止施工縫漏水，滲水，并對各種作用力起到緩沖作用。本產品具有耐老化性能優良，特強的自粘性；夏季高溫不流淌。冬季低溫不發脆；并具有優異的耐水、耐酸堿和耐老化性能；使用壽命長，產品本身無毒，環境良好。為了承受一定的彎曲和壓力。中間來有0.4或0.6mm的鋼板。本產品可以對建筑縫之間提供可靠的防水、防滲功能。當使用普通橡膠止水帶時，如果建筑結構變形大時，橡膠止水帶則隨著結構的沉降，其橫向截面拉長，變薄，超過其疲勞變形極限時，很可能會形成新的滲漏縫隙。我們可以根據用戶要求生產各種非標型號的產品，并滿足各種工程上的實際需要。適用于許多大型建筑領域，尤其是在水壓高和結構變形量較大時，其止水效果更為明顯。
Steel plate rubber sealing strip is inserted into the good will of galvanized steel plate vulcanized rubber, rubber made of a special rubber antioxidant and promoting dose, etc., a new type of sealing products through mixing, extrusion and galvanized steel plate bonding. The waterproof belt can effectively prevent the elastic, deformation and the temperature difference of the construction joint under various loads, and thus the strong sealing can be achieved. And can effectively prevent the construction joints leakage, seepage, and the role of a buffer role. This product has good aging resistance, strong self adhesion; summer high temperature does not flow. Low temperature and no brittleness in winter, and has excellent water resistance, acid and alkali resistance and aging resistance, long service life, non-toxic products, good environment. In order to withstand certain bending and pressure. There are 0.4 or 0.6mm steel plates in the center. This product can provide reliable waterproof and anti-seepage function between building joints. When using the ordinary rubber sealing strip, if the building structure of large deformation, the rubber sealing strip with the settlement of the structure, the transverse section of elongated, thin, more than the fatigue limit of deformation, it is likely to form a new leakage gap. We can produce all kinds of non-standard products according to the requirements of users, and meet the actual needs of various projects. It is suitable for many large building fields, especially when the water pressure is high and the structure deformation is large, the sealing effect is more obvious.
我公司可以生產各種規格的鋼板膩子止水帶產品，并可根據用戶要求，生產各種非標型號的產品，滿足工程上的實際需要。1、主要應用范圍：隧道、地鐵、堤壩、涵洞、水利水電工程中施工縫、高層建筑地下室、地下停車場等主要工程施工縫。
200*6丁基鋼板膩子止水帶用途
Our company can produce all kinds of steel plate putty waterproof belt products, and according to user requirements, the production of various non-standard models of products, to meet the actual needs of the project. 1, the main application scope: tunnel, subway, dam, culvert, water conservancy and hydropower project construction joints, high-rise building basement, underground parking lot and other major construction joints.
鋼板膩子止水帶的施工方法及注意事項
Construction method and matters needing attention of steel plate putty water stop belt
A、將鋼板膩子止水帶膨脹膩子連接處搭接100mm，用手壓緊排除空氣靠其自身粘接牢固，并加固軋絲后重新貼上保護膜。
A, the steel plate putty water stop belt expansion putty connection place overlap 100mm, press the air by hand, firmly adhere to its own, and strengthen the rolling silk, again affixed with protective film.
B、將鋼板膨脹膩子止水帶安放在墻體的中間位置，用鐵絲固定在鋼筋上，止水帶略高于混凝土介面。
B, the steel plate expansion putty water stop belt is placed in the middle of the wall, and the steel bar is fixed on the steel bar, and the water stop belt is slightly higher than the concrete interface.
C、再次澆注前，將橡膠止水帶下端的保護膜取掉，混凝土澆注至鋼板膨脹膩子寬度的1／21／3處，在二次澆注前將上端保護膜取掉，再進行澆注。而采用鋼板橡膠止水帶時，兩邊的鋼板與周圍的混凝土結構的粘接極強，同是鋼板與橡膠粘接極其牢固。當結構變形時，只存在橡膠部分拉長，變薄，而鋼板與混凝土、鋼板與橡膠之間不會產生新的滲漏縫隙，因此，用鋼板橡膠止水帶即增強了結構變形時的防滲性能，同時對整個工程的防滲止水起到了重要的質量保證。
Before the C and re pouring, the protective film at the lower end of the rubber sealing strip is removed, and the concrete is poured to the 1 / 21 / 3 of the width of the expansion putty of the steel plate, and the upper protective film is taken out before the two pouring, and then the casting is carried out. While using steel plate rubber water stop, both sides of the steel plate and the surrounding concrete structure of the bond is strong, the same is the steel plate and rubber bonding is extremely strong. When the deformation of the structure, only the rubber part elongate, thin, but not between steel and concrete, steel plate and rubber leakage gap, new so that enhances the anti-seepage performance of structure deformation when using steel plate rubber waterstop, and seepage of the whole project played an important quality assurance.
200*6丁基鋼板膩子止水帶用途
