MSC2D1G800B2-HJS6 *EOL* last time order from Fides about 159 pcs = stock???
M2UK-1GSF7C06-G *en fase de homologación*
阿克瑪斯US1401/2700舵槳離合器彈性緩沖裝置，圖號：131132 件號;6415036930209 彈性休R 65 SPIDER 98SHA
DYNISCO壓力變送器 MDT462F-1/2-3.5C-32/46-A
MDT462F-1/2-3.5C-15/46-A
wilks "InfraCal Model CVH ? Min. Detection Limit: 2ppm
? For use with S-316, Freon-113, AK 225,
Perchlorethylene
? CVH Sample Stage for use with 10mm Quartz
Cuvette Cells
? Set of 4 10mm Cells
? Water or Soil Analysis
? Uncalibrated 405-0003/12"
"InfraCal Model HATR-T2 ? Min. Detection Limit: 8ppm
? For use with hexane, pentane, Vertrel MCA
? Built-in Cubic Zirconia ATR Sample Stage
? Water or Soil Analysis
? Uncalibrated 405-1009"
"Includes a Factory Calibration using S- 316
TOG/TPH Calibration Standards for samples
containing primarily petroleum hydrocarbons.
(Please specify if calibration is for water or
soil) 405-0003/12-41"
"Includes a Factory Calibration using Hexane
TOG/TPH Calibration Standards for samples
containing primarily petroleum hydrocarbons.
(Please specify if calibration is for water or
soil) 405-1009-44"
"Includes a Factory Calibration using
Tetrachloroethylene (Perchloroethylene)
TOG/TPH Calibration Standards for samples
containing primarily petroleum hydrocarbons.
(Please specify if calibration is for water or soil)
Note: Direct replacement for P/N: 405-0003/12-64 405-000 3/12-78"
"Includes a Factory Calibration using S-316
TOG/FOG Calibration Standards for wastewater
that contains animal and/or plant oils.
(For water only) 405-0003/12-40"
"Includes a Factory Calibration using Hexane
TOG/FOG Calibration Standards for wastewater
that contains animal and/or plant oils.
(For water only) 405-1009-72"
Set of Four 10mm Quartz Cuvette Cells with Teflon Stopper for use with Model CVH.403-0012
InfraLog Serial Printer, Model DT2205 Prints calibration and measurement data, complete with sequence number, date and time. Includes all required cables and one thermal roll paper. 4.29”W x 8.23”H x 6.73”L Note: This printer is only for use with InfraCal Analyzers, it is not for use with InfraSpec VFA-IR Spectrometers. 403-1067
Carrying Case for InfraCal Analyzers with pre-diced pluck foam. 18.5” x 14.6” x 8”, 10 lbs.403-0013
External 12v Battery Pack with 120v/60Hz charger (for use in North America). Includes carrying case with shoulder strap and cigarette lighter adapter cable for connection to analyzer. Provides 16 hours of continuous operation.403-0003
12V Automotive Power Adapter Cable 403-0002
Dust Cover 403-0005
"All InfraCal TOG/TPH Analyzers come with a One Year Factory Warranty against defective parts and workmanship. Additional one year and two year Extended Factory Warranties are available as follows and must be purchased at the time the original analyzer is purchased: 403-1051
Extended Factory Warranty for additional One Year (total two year factory warranty from date of shipment)"
Extended Factory Warranty for additional Two Years (total three year factory warranty from date of shipment)403-1052
"S-316 TOG/TPH Six Point Calibration Standard Set: Light Mineral Oil in S-316 prepared
by a certified laboratory for TOG/TPH Analysis. Nominal concentration values are 100 mg/kg
(ppm), 250 mg/kg, 500 mg/kg, 1000 mg/kg, 1500 mg/kg and 2000 mg/kg for soil assuming a
1:1 extraction ratio; and 10 mg/L (ppm), 25 mg/L, 50 mg/L, 100 mg/L, 150 mg/L and 200
mg/L for water assuming a 10:1 extraction ratio. The set contains 6 standards along with a
solvent blank in 4 ml flame sealed ampoules.
Recommended for customers in the petroleum industry who are primarily
measuring petroleum hydrocarbons in water or soil.403-1041"
"403-1040
S-316 TOG/FOG Six Point Calibration Standard Set: 50:50 Isooctane/Octanoic Acid in S-
316 as per ASTM Method D 7066-04 prepared by a certified laboratory. Nominal
concentration values are 10 mg/L (ppm), 25 mg/L, 50 mg/L, 100 mg/L, 150 mg/L and 200
mg/L for water assuming a 10:1 extraction ratio. The set contains 6 standards along with a
solvent blank in 4 ml flame sealed ampoules.
Recommended for customers measuring non-polar (petroleum) and polar (animal and
vegetable fats) hydrocarbons for TOG or FOG measurements such as municipal
wastewater or industrial wastewater that includes animal and vegetable fats."
"403-1078
Tetrachloroethylene (Perchloroethylene) TOG/TPH Six Point Calibration Standard Set:
Light Mineral Oil in Tetrachloroethylene prepared by a certified laboratory for TOG/TPH
Analysis. Nominal concentration values are 100 mg/kg (ppm), 250 mg/kg, 500 mg/kg, 1000
mg/kg, 1500 mg/kg and 2000 mg/kg for soil assuming a 1:1 extraction ratio; and 10 mg/L
(ppm), 25 mg/L, 50 mg/L, 100 mg/L, 150 mg/L and 200 mg/L for water assuming a 10:1
extraction ratio. The set contains 6 standards along with a solvent blank in 4 ml flame sealed
ampoules.
Recommended for customers in the petroleum industry who are primarily
measuring petroleum hydrocarbons in water or soil."
